If you have been living in older houses, probably now you are thinking of getting new window installation Toronto and forget those old unattractive windows. Whether, a glass broke or you just realised those old windows are making you pay more for your monthly utility bills, it is good to have those old windows removed and replaced with new ones that are more energy efficient and attractive.
However, the decision of replacing the windows is one thing and that of choosing whether to consider DIY or a professional is another one. By the time you are done with reading this article, you will appreciate why DIY window installation Toronto is not a nice decision to go with.
- Various Kinds of Window Replacement
The sash replacement kit has the responsibilities to install brand new movable components inside a particular window frame. It never replaces the window frame. An insert replacement window can be defined as a completely assembled window along with its frame. The whole unit is just placed in the previously existing frame; hence the window looks comparatively smaller. On the other hand, the full-frame replacement process involves replacement of windows along with its frame. But, this Toronto window replacement technique needs to remove the previously existing frame first.
- Issues Associated With the Window Replacement Process
Whether you are using the previously existing frame or new frame, every individual window replacement mechanism is quite challenging and complicated. You can go for certain home improvement projects by yourself. On the contrary, there are several other home improvement projects those are required to be handled by experienced professionals.
- You Need Proper Assistance for Window Replacement
You can’t just buy a new window and place it in its place. The window opening must be measured perfectly so that exact fitting can be done. Our company is providing the best window installation Toronto services since years.
- Steps of Windows Replacement
- Perfect Measurement
Perfect measurement of the previously existing frame is very much essential. Apart from this, you are required to measure all required dimensions properly.
- Eliminating the Sash and Jamb
In the subsequent step, the sash must be removed through removing stops. This step can be performed through unswerving and prying. There are high chances of component damage.
- Constructing the Frame
You are required to fill each and every hole and crack with the help of exterior-grade wood putty. You are needed to eliminate the sash weights through the process of unscrewing the access panel.
- Insulation Process
The frame is required to be insulated. You are required to remove traditional fibreglass insulation. Then several tiny 3/8 inch holes are needed to be drilled at the place of sill and head jamb. Then, the actual window replacement process can take place.